Accton Technology CheetahAccess Wireless Gateway AC-IG2004W Guía de instalación descargar pdf (Pagina 57)

Configuring Your Gateway

3. Enter your ISP account user name and password in the “Dial-Up Account

Information.”

4. Enter the “Modem Initialization String” provided by your modem manufacturer.

The following is a sample initialization string: “ATQ1SO=1&D0&K0&W” as

defined below:

Q1 : Inhibit result codes to DTE

S0=1 : Auto answer on first ring

D0 : Don't care DTR

K0 : Disables DTE/DCE flow control

W : Write command to modem memory

5. In the “Maximum Idle time” field, enter the maximum idle time for the

CheetahAccess Wireless Gateway (in seconds).

6. If you are assigned a dynamic IP address every time you dial up, select “No” for

“Has your Internet Service Provider given you an IP address?” However, if your

ISP has assigned a fixed IP address for you to use, select “Yes” for this item

and enter the IP address and subnet mask.

7. If your ISP has given you a secondary phone number, or if you have a

secondary Internet service account, then fill in the relevant fields under

“Secondary Dial-up.”

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 65 66

Sin comentarios

Accton Technology CheetahAccess Wireless Gateway AC-IG2004W Guía de instalación Pagina 57